Product Description
The 5APC2100.BY34-000 is one of the latest products designed by B & R Automation to improve industrial production and processing operations by accurately controlling automation processes. It is a PC system unit with sophisticated Intel’s Bay Trail architecture and the ability to support various industrial machines. This automation PC requires a connection to an automation panel to form a full system. The connection between the PC and the panel can be done with DVI, SDL or SDL3 cable. For the connection of other peripheral devices, there are several interfaces available; this includes the USB interfaces, and the Ethernet interface. At the USB interface, the data transfer rate is measured to be 1.5 megabits per second at low speed, 12 megabits per second at full speed, and 5 gigabits per second at super speed. The supper speed option is only available on the USB 3.0 type. For the Ethernet interface, the peach transfer rate is about 1000 megabits per second. While the Maximum baud rate is 1 gigabyte per second.
The 5APC2100.BY34-000
The 5APC2100.BY34-000 The Industrial PC unit does not consume too much electrical power during operation. The nominal voltage required is 24 volts, while the nominal current is measured to be about 3 amperes. There is no air blower on his product; however, heat is reliably regulated through the process of natural convection. The typical inrush current for this product is 6 amperes however it can reach a maximum value of 10 amperes for less than 10 seconds.
The 5APC2100.BY34-000 Industrial PC unit is classified under the IP20 protection class; it also belongs to the over voltage category II according to EN 61131-2. For optimum operation, the maximum installation height for this product is 1.170 kilograms.
Wake Industrial Warranty
