Product Description

The 5ACCMA00.0101-000 is a mounting unit manufactured by B & R Automation. This mounting unit is an important accessory for the automation panel series, apart from its function in the installation of the panel, it also provides the installed link module or system unit with protection against both solid and liquid interference according to the IP54 protection category. The 5ACCMA00.0101-000 mounting unit is also well suited for installation with a 75 x 75 and 100 VESA mount. The VESA mount can also be installed when rotated through an angle of about 180 degrees.

The 5ACCMA00.0101-000 Automation panel is classified under the Type 1 degree of protection according to UL 50 classification. However, the protection category of the mounting unit is only guaranteed if it is installed properly on the panel. The housing material of this product is made from aluminum, to increase the degree of protection, the housing is also coated by which aluminum, similar to RAL 9006.

The 5ACCMA00.0101-000 is intended for indoor use; however, it is not seriously affected by temperature for industrial vibrations. Also, the total weight of the mounting unit is measured to be about 2.6 kilograms. There is a USB 2.0 interface routed externally on this mounting unit; this interface supports a data transfer rate of 1.5 megabits per second at low speed and 12 megabits per second at full speed. However, the maximum data transfer rate through the USB 2.0 interface is measured be 30 megabits per second. The USB interface supports current carrying capacity as high as 500 milliamperes.