Product Description

The 5ACCMA00.0002-000 is a mounting unit manufactured by the well-trained engineers of B & R Automation as part of the AP 5000 industrial panel series. This product is built according to internationally recognized quality and safety standards. It has a compact design and it is designed to protect installed link modules and system units from both foreign solid and liquid interference according to the IP65 protection classification. The 5ACCMA00.0002-000 mounting unit also supports the direct installation of a flange directly on it. The unique symmetrical design of the back of the AP5000 panel series also makes the installation of the mounting unit in two different directions possible. Customers who decide to use a flange for mounting have the opportunity to direct the flange output towards the top or the bottom.

The 5ACCMA00.0002-000 mounting unit is equipped with two USB interfaces, which are present on the side of its housing unit and are intended for service purposes only. Like all other parts of the mounting unit, the USB interface is covered to maintain the IP65 protection of the product. The data transfer rate through the interface varies. At low speed, it is about 1.5 megabits per minute; at full speed, the data transfer rate is 12 megabits per second. This value can reach a whooping 450 megabits per second at a high data transfer rate. The 5ACCMA00.0002-000 also has a current carrying capacity that is estimated to be about 0.5 amperes.

The 5ACCMA00.0002-000 mounting unit has a total weight of 2.5 kilograms. The Width of the mounting unit is about 280 millimeters, the height is approximately 259 millimeters, and the depth is 96 millimeters. The product is belongs to degree of protection 2 according to EN 61131-2.