Product Description

The 4PP220.0571 power panel device is produced by the B & R Industrial Automation firm. It belongs to the 4PP product line. The device comes equipped with a Geode SC2200 processor. It has 16 kilobytes of L1 cache and a floating-point unit. The device has 64 MB of DRAM memory that uses the SO-DIMM 144-pin socket. The graphics controller is also the Geode SC2200 chip. It has 4 megabytes of shared memory reserved for the graphics. The unit has 256 kilobytes of battery-buffered SRAM. It features a watchdog controller as well as a power failure logic controller.

The 4PP220.0571 power panel device comes with a Renata 950 mAh device with a lifespan of 4 years. The unit also has a reset button that can be accessed from outside the device. There are 2 node switches with 16 digits each. The unit has one aPCI slots with a maximum holding torque of 0.7 Newton meters. The display on the device is an LCD panel that can display up to 8 shades of gray. It has a diagonal length of 5.7 inches and a contrast ratio of 25:1. The resolution of the display is 320 by 240 pixels.

The 4PP220.0571 power panel has horizontal viewing angle of 40 degrees. The background lighting has a brightness rating of 140 cd/m2 and the half-brightness time is 50,000 hours. The touch screen is of the Gunze type and it uses a Hampshire, serial, 12-bit controller. It is a resistive touch screen and has an 84 percent degree of transmission. The power supply of the panel has a rated voltage of 24 VDC, a maximum starting current of 20 A, and a typical power consumption rating of 12 watts.