4PP065.0571-K05

Product Description

The 4PP065.0571-K05 product is from the B & R Automation company. It is equipped with a 5.7-inch, TFT color screen and a 24 VDC power supply. The product has multiple LEDs and uses a removable battery with a service life of 4 years. The controller runs the Automation Runtime operating system. The processor of the device is the Geode LX800, which also serves as its graphics controller. The 500 MHz processor has a floating-point unit and 128 kilobytes of L1 and L2 cache. The unit has a watchdog and a battery-backed real-time clock. The power failure logic uses an MTCX controller and has a buffer time of 10 milliseconds.

The 4PP065.0571-K05 power panel has 128 megabytes of DDR SDRAM for standard memory and 232 kB of SRAM for user RAM. 8 megabytes of memory is allocated for the graphics controller and there is 4 MB of flash memory for the unit's firmware. The display on the device is a touch screen of the resistive type. The display has a QVGA resolution and a contrast ratio of 350 to 1. The unit features one POWERLINK interface with a 100 Mbit/s transfer rate and a maximum cable length of 100 meters between two stations. The nominal current of the unit is 0.45 A and it has a typical power consumption of 10 watts.

The 4PP065.0571-K05 has an IP 65 protection rating for the front of the device as per the EN 60529 standard. It can be installed without limits at any elevation up to 2000 meters above sea level. Above this altitude, the ambient temperature reduces by 0.5 degrees per 100 meters. The ideal environmental conditions for storing the unit are a temperature range of -20 degrees to 70 degrees Celsius and a non-condensing relative humidity of 5 to 90%.