Product Description
The EK1101-0008 from Beckhoff Automation is an EtherCAT coupler. The bus coupler comes with an M8 connection and an ID switch. This product is one of the several such couplers from the manufacturer in the EK1100 series. It is equipped with two M8 sockets that offer compatibility with the ones on the EtherCAT box modules or terminals with EtherCAT networks. The device transfers data using shielded Ethernet/EtherCAT cables. The unit supports the connection of an added terminal to its right and a higher-level network to its left. The coupler provides the terminals that are connected to it with the E-bus current that is required for communication purposes. The EK1101-0008 device comes with a one-year warranty period.
The upper Ethernet interface of the bus coupler helps in establishing connectivity with a network. The M8 socket in the lower portion can be used to connect the unit to other EtherCAT devices if needed. The product does not require any specific configuration. It couples ELxxxxEtherCAT terminals with 100BASE-TX EtherCAT networks. The device supports a maximum of 655,365 EtherCAT terminals in the overall system. The coupler operates between an ambient temperature range of -25°C and +65°C. The unit has a voltage rating of 24VDC (-15%/+20%).
The coupler can be installed at any point in the Ethernet signal transfer section barring direct installation on the switch. This device can be mounted on a 35mmmounting rail adhering to EN 60715 specifications. It has an IP 20 protection rating. The power contacts have a maximum current rating of 10A and a maximum voltage rating of 24VDC. The product is cULus Listed and CE Certified. The EK1101-0008 coupler has a typical delay of 1µs. The unit supports a maximum relative humidity of 95% without condensation. The bus coupler can be transported to any location across the world through our trustworthy shipping partners.