Product Description

The Beckhoff CX1030-0013-1002 Embedded PC from the CX Series for industrial automation contains the high end processor called as Embedded PC. It has Intel® Pentium® M processor with a clock frequency of 1.8GHz which is sufficient for real time control applications. The single core processor performs very well and it is reliable. This model has 256MB DDR RAM which expands up to 1GB to support advanced applications. There is a Compact Flash card slot and it comes with storage of 128 MB. The storage facility of the computers is compensated with expectations of additional development in future.

The CX1030-0013-1002 contains 2 RJ45 Ethernet ports 10/100 Mbit/s with an internal switch for network communications. Four diagnostic LEDs also indicate power, LAN link/activity 2, TwinCAT operational status and flash access 1 helping to improve troubleshooting for users as they receive up to date information on the system operation as well as the issues. This Embedded PC use operating System Windows Embedded CE 6 or Windows Embedded Standard 2009, and also support TwinCAT 2 PLC runtime, NC PTP runtime, NC I runtime which provides a convenience of use over a wide variety of automation and motion control needs. This device interacts with I/O devices through 16-bit ISA (PC/104) system bus and works with the CX1000 power supply modules (K-bus, IP-Link or E-bus).

The maximum available power consumption of the CX1030-0013-1002 is 32 W, and the overall dimensions of its case make it possible to offer industrial applications compact solution which measures 96 mm x 112 mm x 99 mm. The possible operating temperature of the device is 0 to +50C, and the storage temperature is between - 25 to 85C, which makes the device workable within a few settings.