Product Description
The CP2224-0010 is a high-performance Panel PC manufactured by the Beckhoff Company. It is used in applications such as machine and plant engineering. The display in this panel in top-grade offering feature-laden solutions in machine engineering applications. Thanks to its many features, it presents you a cost-effective alternative compared to other control systems. Control and automation engineers are to operate this panel. The engineer should observe stipulated regulations regarding this HMI. If switched off inappropriately, it can cause data loss.
The CP2224-0010 comes with numerous benefits such as a TFT display, glass front with unmatched responsiveness, one slot for SSD or 2 ½ inch hard disk and one slot for CFast card, both of which are accessible from the outside. It has easy-to-access connectors located at the bottom and two accessible fan cartridges. When installing the CP2224-0010 ensure that the supply voltage is switched off to avoid injuries. Installation should be done in front of the control cabinet and 5cm should be left above and below the housing for air circulation.
The CP2224-0010 technical data include a weight of 9.6kg (landscape) and 9.8kg (portrait). It features a 24V DC (20.4 – 28.8V DC) supply voltage and power consumption of 87W with 24” display. There are at least three interfaces such as 2 Ethernet adapters coupled with an RJ-45 connection, 4 USB 2.0 interfaces, and one serial interface. There are also two protection classes, IP 65 and IP 20 on the front and rear sides of the Panel PC. Permissible conditions include humidity of less than 95%, operating and storage temperature range of 0 to 55 degrees and -25 to 65 degrees Celsius respectively. The engineer should ensure that it is used for the right purpose and that it is in sound condition.
Wake Industrial Warranty
