Product Description

AM8531-0DG0-0000 is an advanced three phase permanent magnet excited synchronous which is comparatively faster and powerful than the rest for industrial use. The motor voltage range is suitable as it accommodates between two hundred to four hundred- and eighty-volts AC and at standstill gives a torque of 1.38 Nm and a rated one of 1.33 Nm. The motor can thus give a peak torque rated at 6.07 Nm and operated rotational speed of 6000 minus one minute and give a power of 0.84 Kilo watts rated. The motor has a standstill current capacity of 1.95 A and current capacity of 10.7 A thus rated torque constant of 0.71 Nm/A and rotor moment of inertia of 1.35 kgcm2 which provides fast and stable operations focusing particularly at elevated speed states.

The motor also has an option of an OCT with feedback and an absolute encoder system which is a helpful factor in elevating the operability of the motor through intricate control features as it aids in a feedback system and therefore it builds efficiency for the motors. The corresponding flange code for this motor is F3(72 mm) and with a shaft diameter of 14 k6, it has such various dimensional compatibility with mechanical structures.

While performing the installation of the motor, it is important to adhere to the wiring and connection instructions provided in the manual. All wires related to the motor cable should be bolted up properly while the copper-sheathed end of the cable should be bolted with the shield busbar through the shield clamp and the screw fully turned in to hold it stable.